Intelix ASW-WP Installation Manual Manual de usuario descargar pdf (Pagina 9)

ASW-WP Installation Guide

Device Power

The ASW-WP supports [2] types of power input: PoE and rear panel input. When using PoE, a

compatible HDBaseT receiver can power the ASW-WP by inserting power onto the twisted pair

cable. When using a compatible receiver (such as the DIGI-HD60C-R), there is no need to use the

rear panel power input. If using a different receiver that does not supply power (such as the DIGI-

HD70-R) you must connect power to the rear power input. Using this method, a 5vDC 2a power

supply should be used (such as the PS-5D-20TL).

RS232

The ASW-WP can be controlled by RS232

by connecting to a computer’s serial port

or 3

party control system. The diagram

below shows an example of this

application:

Alternatively – the ASW-WP can be

programmed to control the display via RS232;

more about this feature on p. 17. Connections

for this method would be as shown in this

diagram:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Sin comentarios

Intelix ASW-WP Installation Manual Manual de usuario Pagina 9